Filter Dryer - Filtrodry FEP/XD

Nutsche Pressure Filter-Dryer

Features

Nutsche pressure filter-dryer with special four arms heated agitator designed to maximize the heated surface in contact with the product and hence minimise the drying time
Recommended for: pressure filtration, "re-slurry" washing, smoothing and displacement washing, vacuum drying, product discharge
Includes: removable flat bottom flanged to the cylindrical vessel, filter media, special four armed heated agitator, double mechanical seal, dust filter, side mounted discharge port, CIP washing system for all of the internal contact surfaces
Special four-armed agitator that doubles the net effective heat surface area in contact with the product, designed to optimize the smoothing phase and the product discharge without incurring any mechanical damage to the product
50% reduction in drying time compared to the normal two-armed agitator design
Validated CIP

Available filter surface areas up to 12 m2
Agitator with straight or "S" shaped arms
Bottom flange with C-clamps or hydraulic bayonet closure
Mono or multilayer sintered filter media
Double mechanical seal wet, dry or "lift-off"
Side mounted discharge port with an O-ring, metal-to-metal or "reverse" seal
Dust filter media in Gore-Tex or multilayered sintered metal
Available in chemical, pharmaceutical and sterile versions
Material in contact with the product: 316 L Stainless Steel, SAF 2205, Uranus B6, Alloy C 22, Titanium and many more