Reactor Filter Dryer - Totum RFE

All-in-one Reactor-Filter-Dryer

Features

All-in-one Reactor-Filter-Dryer
Recommended for: reaction, pressure filtration, "slurry" washing, smoothing and displacement washing, vacuum drying & product discharge.
Includes: removable flat bottom flanged to the cylindrical vessel, filter media, heated agitator designed with special teeth able to optimize the smoothing of the cake, vacuum drying and product discharge without incurring any mechanical damage to the product, double mechanical seal, side or top mounted discharge port, CIP washing system for all of the internal contact surfaces, tilting assembly - enabling an approximate 180° vessel rotation
Reaction ingredients are loaded in the vessel, which is then tilted approximately 180 ° to the reaction position, with the filter screen in the upper part of the vessel, out of the slurry. Once filtration is required, the vessel is tilted to its 0Â° position. Washing steps will also take place at the same angle.
In order to perform vacuum drying vessel is tilted to an approximate 120° position, maximizing the heated surface in contact with the product and, at the same time, using the filter screen as dust filter.
Depending on the discharge port location, discharge will take place in the 0° or in the 180° tilted position.
Validated CIP

Available filter surface areas up to 4 m2
Agitator with straight or "S" shaped paddles
Bottom flange with C-clamps or hydraulic bayonet closure
Mono or multilayer sintered filter media
Double mechanical seal wet or "lift-off"
Side mounted discharge port with an O-ring, metal-to-metal or "reverse" seal or top mounted discharge port with ball type valve or segmented type valve
Available in chemical, pharmaceutical and sterile versions
Vacuum, solvent recovery, heating & cooling, inerting systems
PLC automation systems
Material in contact with the product: 316 L Stainless Steel, SAF 2205, Uranus B6, Alloy C 22, Titanium and many more